HP Ultrium 448c HP StorageWorks Tape Blade User Guide (625055-001, November 20 - Page 22
Installation with a half-height partner server blade
View all HP Ultrium 448c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Figure 3 Half-height device bay numbering in a c7000 enclosure . NOTE: In c3000 enclosures devices are seated horizontally but the same installation rules apply. The Tape Blade resides in the adjacent device bay below or above the partner server blade. Slot combinations are 1&2, 3&4, 5&6, 7&8. Figure 4 Half-height device bay numbering in a c3000 enclosure . Installation with a half-height partner server blade If you are installing with a full-height partner server blade, refer to "Installation with a full-height partner server blade" on page 27. NOTE: The partner server blade and any device bay dividers must be installed and powered down before you install the Tape Blade. See the documentation that ships with the server blade. 22 Installing an HP StorageWorks Tape Blade