HP Vectra VEi8 HP Vectra VLi8, 3 COM Etherlink III PCI 10BT (3C590-TP), Instal - Page 23

9 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter Microsoft Windows NT3.51 Workstation 9 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter Microsoft Windows NT3.51 Workstation Connecting to a Requirements Windows NT 3.51 Server • HP Vectra with Windows NT 3.51 Workstation. • 3COM Etherlink III 3C590 PCI 10BT network adapter and driver disk version 5.2.2. • Driver File: EL59X.SYS, version 1.22 • Microsoft Windows NT 3.51 Workstation media. • Microsoft Windows NT 3.51 Service Pack 5 media. • Microsoft Windows NT 3.51 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport and NWLink NetBIOS network protocols. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 10 300 Vectra VEi7 05 300 Vectra VEi8 05 300 Procedure 1 With the HP Vectra turned off, install the 3COM 3C590 network adapter into a PCI slot. 2 Connect network cable media to the 3COM 3C590 network adapter. 3 Log into Windows NT with administrator privileges. 4 Open the "Network" icon in the "Control Panel" program group. 5 Click on "YES" in the "Network Settings" dialog box to install Windows NT Networking. 6 Insert the Windows NT 3.51Workstation CD in the CD-ROM drive. 7 Set the path to "D:\I386" (D:\ represents the CD-ROM drive with the Windows NT 3.51 CD) in the dialog-box of the Windows NT Setup window and click on "Continue".