HP Vectra VEi8 HP Vectra VLi8, 3 COM Etherlink III PCI 10BT (3C590-TP), Instal - Page 27

11 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter Microsoft Windows NT 3.51 Workstation 11 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter Microsoft Windows NT 3.51 Workstation Connecting to a Novell NetWare 4.11 Server Requirements • HP Vectra with Windows NT3.51 Workstation. • 3COM Etherlink III 3C590 PCI 10BT network adapter and driver disk ver- sion 5.2.2. • Driver File: EL59X.SYS, version 1.22 • Microsoft Windows NT 3.51 Workstation media. • Microsoft Windows NT 3.51 Service Pack 5 media. • Novell NetWare 4.11 Server system that supports IPX network protocol. • Novell IntranetWare Client for Windows NT v4.11b installation media. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 10 300 Vectra VEi7 05 300 Vectra VEi8 05 300 Procedure 1 With the HP Vectra turned off, install the 3COM 3C590 network adapter into a PCI slot. 2 Connect network cable media to the 3COM 3C590 network adapter. 3 Log into Windows NT with administrator privileges. 4 Open the "Network" icon in the "Control Panel" program group. 5 Click on "YES" in the "Network Settings" dialog box to install Windows NT Networking. 6 Insert the Windows NT 3.51Workstation CD in the CD-ROM drive. 7 Set the path to "D:\I386" (D:\ represents the CD-ROM drive with the Windows NT 3.51 CD) in the dialog-box of the Windows NT Setup window and click on "Continue".