HP Vectra VEi8 HP Vectra VLi8, 3 COM Etherlink III PCI 10BT (3C590-TP), Instal - Page 31

13 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter Microsoft Windows for Workgroups 3.11 13 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter Microsoft Windows for Workgroups 3.11 Connecting to a Novell NetWare 4.11 Server Requirements • HP Vectra with DOS and MS-Windows for Workgroups 3.11. • 3COM Etherlink III 3C590 PCI 10BT network adapter and driver disk ver- sion 5.2.2. • Driver File: EL59X.386, version 1.18 • Microsoft Windows for Workgroups 3.11 media. • Novell NetWare 4.11 Server system that supports IPX network protocol. • NetWare Client for DOS and MS Windows v1.21 installation media. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 05 210 Vectra VEi7 05 300 Vectra VEi8 05 300 Procedure 1 With the HP Vectra turned off, install the 3COM 3C590 network adapter into a PCI slot. 2 Connect network cable media to the 3COM 3C590 network adapter. 3 From the location of the "NetWare Client for DOS and Windows v1.21" installation files, execute "Install.exe". 4 Select option 5 "Select the driver for your network board" and press "Enter". 5 Select "OTHER DRIVERS"from the Network Board selection. 6 Insert the 3COM 3C590 driver disk into the floppy drive. 7 Type the path "A:\NETWARE\CLIENT" when prompted and press "Enter". 8 Select "3Com Fast EtherLink/EtherLink III Bus Master Family" and hit "Enter".