HP Vectra VEi8 HP Vectra VLi8, 3 COM Etherlink III PCI 10BT (3C590-TP), Instal - Page 9
Microsoft Windows 95, SR2.5, Connecting to a Netware, 12 Server, Requirements, Device Configuration
View all HP Vectra VEi8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
3 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter Microsoft Windows 95 SR2.5 3 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter Microsoft Windows 95 SR2.5 Connecting to a Netware Requirements 3.12 Server • HP Vectra with Windows 95 SR2.5. • 3COM Etherlink III 3C590 PCI 10BT network adapter and driver disk version 5.2.2. • Driver File: EL59X.SYS, version 1.22 • Microsoft Windows 95 SR2.5 media. • Novell Netware 3.12 Server that supports IPX network protocol. • Novell Client for Windows 95 v2.5 installation media. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 5 210 Vectra VEi7 03 210 Vectra VEi8 07 210 Procedure 1 With the HP Vectra turned off, install the 3COM 3C590 network adapter into a PCI slot. 2 Connect network cable media to the 3COM 3C590 network adapter. 3 Reboot the system to Windows 95SR2.5. 4 Windows 95SR2.5 will automatically recognize the 3COM 3C590 network adapter as "3Com 3C590 EtherLink III". 5 Insert the 3COM 3C590 driver disk in the floppy drive and click on "Next" from the Update Device Driver Wizard dialog box. 6 When Windows 95 detects the updated driver, "3Com EtherLink III 3C590", click on "Finish".