HP Vectra VEi8 HP Vectra VEi7, D-Link DFE-500TX ProFAST 10/100 PCI Ethernet Ad - Page 20

8 Installing the D-Link DFE-500TX ProFAST PCI Ethernet Adapter Microsoft Windows NT 4.0 Workstation 8 Installing the D-Link DFE-500TX ProFAST PCI Ethernet Adapter Microsoft Windows NT 4.0 Workstation Connecting to a Novell NetWare 4.11 Server Requirements • HP Vectra with Windows NT4.0 Workstation. • D-Link DFE-500TX ProFAST 10/100 PCI Ethernet adapter and driver disk version 971201. • Driver: DLKPCI.SYS, version 4.22.1 • Microsoft Windows NT 4.0 Workstation media. • Microsoft Windows NT 4.0 Service Pack 4 media. • Novell NetWare 4.11 Server system that supports IPX network protocol. • Novell IntranetWare Client for Windows NT v4.11b installation media. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 11 1080 Vectra VEi7 03 DC00 Vectra VEi8 10 E400 Procedure 1 With the HP Vectra turned off, install the D-Link DFE-500TX network adapter into a PCI slot. 2 Connect network cable media to the D-Link DFE-500TX network adapter. 3 Power on the system and log into Windows NT with administrator privileges. 4 Open the "Network Properties" window and agree to install "Windows NT Networking". 5 With "Wired to the Network" checked, click on "Next". 6 Click on the option to "Select from list" then on "Have Disk". 7 Insert the D-Link DFE-500TX driver disk into the floppy drive.