HP Vectra VEi8 HP Vectra VEi7, D-Link DFE-500TX ProFAST 10/100 PCI Ethernet Ad - Page 31
Microsoft Windows for, Workgroups 3.11, Connecting to a Novell, NetWare 4.11 Server, Requirements,
View all HP Vectra VEi8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
13 Installing the D-Link DFE-500TX ProFAST Ethernet PCI Adapter Microsoft Windows for Workgroups 3.11 13 Installing the D-Link DFE-500TX ProFAST Ethernet PCI Adapter Microsoft Windows for Workgroups 3.11 Connecting to a Novell NetWare 4.11 Server Requirements • HP Vectra with Windows for Workgroups 3.11 installed. • D-Link DFE-500TX FAST 10/100 PCI Ethernet adapter and drivers disk version 971201. • Driver: DLKPCI.DOS, version 2.42 • Microsoft Windows for Workgroups 3.11 media. • Novell NetWare 4.11 Server system that supports IPX network protocols. • NetWare Client for DOS and MS Windows v1.21 installation media. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 09 1400 Vectra VEi7 03 DC00 Vectra VEi8 11 E400 Procedure 1 With the HP Vectra turned off, install the D-Link DFE-500TX PCI adapter into a PCI slot. 2 Connect network cable media to the D-Link DFE-500TX PCI card. 3 From the location of the "NetWare Client for DOS and Windows v1.21" installation files, execute "Install.exe". 4 Select option 5 "Select the driver for your network board" and press "Enter". 5 Select "OTHER DRIVERS"from the Network Board selection. 6 Insert the D-Link driver disk into the floppy drive. 7 Type the path "A:\" when prompted and press "Enter". 8 Select "DLKPCI PCI Fast Ethernet" and hit "Enter". 9 Accept the default network board settings and press "F10" to save it.