HP Vectra VEi8 HP Vectra VEi7, D-Link DFE-500TX ProFAST 10/100 PCI Ethernet Ad - Page 25
Microsoft Windows NT, 51 Workstation, Connecting to a, Windows NT 4.0 Server, Requirements, Device
View all HP Vectra VEi8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
10 Installing the D-Link DFE-500TX ProFAST Ethernet PCI Adapter Microsoft Windows NT 3.51 Workstation 10 Installing the D-Link DFE-500TX ProFAST Ethernet PCI Adapter Microsoft Windows NT 3.51 Workstation Connecting to a Requirements Windows NT 4.0 Server • HP Vectra with Windows NT 3.51 Workstation. • D-Link DFE-500TX ProFAST 10/100 PCI Ethernet adapter and driver disk version 971201. • Driver: DLKPCI.SYS, version 4.22.1 • Microsoft Windows NT 3.51 Workstation media. • Microsoft Windows NT Service Pack 5 media. • Microsoft Windows NT 4.0 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 05 1080 Vectra VEi7 03 DC00 Vectra VEi8 10 E400 Procedure 1 Before installing the D-Link DFE ProFAST PCI card, power on the machine and boot to MS-DOS. 2 Inset the driver disk and execute "A:\DIAG". 3 At the welcome screen, press Enter to continue diagnostics. 4 When prompted to select an adapter, select card 1 and hit Enter. 5 Verify the adapter settings as listed above. 6 If changes required, save those changes and exit. 7 With the HP Vectra turned off, install the D-Link DFE ProFAST PCI ethernet card in to a PCI slot. 8 Connect network cable media to the D-Link DFE ProFAST PCI ethernet card.