HP Vectra VEi8 HP Vectra VEi7, D-Link DFE-500TX ProFAST 10/100 PCI Ethernet Ad - Page 28
Click on the Do Not Detect button from the Network Adapter Card
View all HP Vectra VEi8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
11 Installing the D-Link DFE-500TX ProFAST Ethernet PCI Adapter Connecting to a Novell NetWare 4.11 Server 9 After Windows loads, go to the "MAIN" program group, and double-click on "Control Panel". 10 Select the "Network" icon, and click "YES" to install NT networking. 11 Insert the Windows NT Workstation CD. 12 In the "Windows NT Setup", set path to your NT files. 13 Click on the "Do Not Detect" button from the "Network Adapter Card Detection" dialog box, and click on "Continue" in the second "Network Adapter Card Detection" dialog box. 14 From the "Drop Down List", scroll down and select " Requires disk from manufacturer", then click on "Continue". 15 Set the path to "A:\" in the "Insert Disk" dialog box, and insert the D-Link driver disk. 16 Click "OK" at the "Install Driver" dialog box. 17 Select "D-Link DFE-500TX PCI Fast Ethernet Adapter (Rev B/C)" in the "Select OEM Option" dialog box, and click "OK". 18 Click on the "Continue" button in the "D-Link DFE-500TX Adapter (*Rev B/C)" setup box. 19 Choose the default protocol and any additional network protocols by clicking the check boxes in the "Windows NT Setup" dialog box, and click "Continue". 20 At the "Domain/Workgroup Settings" dialog box, click on "OK" to accept the default "Workgroup" as your workgroup name. 21 To complete the installation, remove the floppy disk, and click on "Restart Computer" button. 22 Install the Windows NT3.51 Service Pack 5 application.