HP Vectra VEi8 HP Vectra VEi7, D-Link DFE-500TX ProFAST 10/100 PCI Ethernet Ad - Page 27

11 Installing the D-Link DFE-500TX ProFAST Ethernet PCI Adapter Microsoft Windows NT 3.51 Workstation 11 Installing the D-Link DFE-500TX ProFAST Ethernet PCI Adapter Microsoft Windows NT 3.51 Workstation Connecting to a Novell NetWare 4.11 Server Requirements • HP Vectra with Windows NT3.51 Workstation. • D-Link DFE-500TX ProFAST 10/100 PCI Ethernet adapter and driver disk version 971201. • Driver: DLKPCI.SYS, version 4.22.1 • Microsoft Windows NT 3.51 Workstation media. • Microsoft Windows NT 3.51 Service Pack 5 media. • Novell NetWare 4.11 Server system that supports IPX network protocol. • Novell IntranetWare Client for Windows NT v4.11b installation media. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 09 1400 Vectra VEi7 03 DC00 Vectra VEi8 10 E400 Procedure 1 Before installing the D-Link DFE ProFAST PCI card, power on the machine and boot to MS-DOS. 2 Inset the driver disk and execute "A:\DIAG". 3 At the welcome screen, press Enter to continue diagnostics. 4 When prompted to select an adapter, select card 1 and hit Enter. 5 Verify the adapter settings as listed above. 6 If changes required, save those changes and exit. 7 With the HP Vectra turned off, install the D-Link DFE ProFAST PCI ethernet card in to a PCI slot. 8 Connect network cable media to the D-Link DFE ProFAST PCI ethernet card.