HP Vectra VEi8 HP Vectra VEi8, Technical Reference Manual (Product Description - Page 27
Accessory Boards, Network Connectors
View all HP Vectra VEi8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
2 System Features Accessory Boards Network Connectors A 10/100BT connector is located on the rear panel of the PC when a network card is installed. A Wake On LAN (WOL) connector is located on the system board (refer to page 14 for its location) Accessory Boards This PC has four accessory board slots, three PCI slots and one ISA slot. If your PC is equipped with a network interface card, for example, you can still use two PCI slots and one ISA slot for expansion cards. To see the list of accessory boards that can be purchased as accessories for your PC, refer to www.hp.com/go/vectraaccessories. • The PCI slots can be used for short 32-bit PCI boards (length up to 17.6 cm or 6.93 inches). • The ISA slot can be used for a short 16-bit ISA boards. 27