HP Vectra VL800 hp vectra vl800, upgrade and installation guide for desktop mo - Page 24
Removing and Replacing the Cover and Front Bezel, Removing the Cover
View all HP Vectra VL800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
2 Installing and Replacing Hardware Parts in Your PC Removing and Replacing the Cover and Front Bezel Contact your dealer for an up-to-date list of supported devices or connect to www.hp.com/go/pcaccessories then select vl800 in the menu. For the list of non-HP devices compatible with your PC, consult the Tested Product List at www.hp.com/desktops/vectra/vl800/tpl.html (when available). Removing and Replacing the Cover and Front Bezel Removing the Cover For your own safety, it is recommended that you first read the warning notices on pages v and vi. 1 Switch off the monitor and PC. Disconnect all power cables and any LAN or telecommunications cables. 2 If necessary, unlock the cover using the key on the front panel. 3 Unscrew the thumb screw ➋ at the back of the PC. 4 Push the two release latches inwards. 5 Slide the cover towards the rear of the PC until it stops, then lift off the PC chassis. ➍ ➎ ➍ 24