HP Vectra VL800 hp vectra vl800, upgrade and installation guide for desktop mo - Page 42
Completing the Installation of a Mass Storage Device, IDE Drive, SCSI Drive on, SCSI Models, CD-ROM
View all HP Vectra VL800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
2 Installing and Replacing Hardware Parts in Your PC Completing the Installation of a Mass Storage Device IDE Drive SCSI Drive on SCSI Models CD-ROM, CD-RW or DVD-Drive Floppy Drive Completing the Installation of a Mass Storage Device 1 Switch on the computer. 2 To verify the configuration of your hard disk drive, press F2 to enter Setup when the HP logo appears. Once in Setup, select the Advanced menu, then the IDE Devices submenu. In the Primary Master item, check that the details for the device have been correctly detected by the Setup program. 3 Press F3 to save and exit Setup. 4 Refer to the operating system documentation for information on partitioning and formatting a drive. 5 If an IDE drive is removed, switch on the computer. The system BIOS will detect that the device is missing. Press F4 to confirm that you want to remove the device. The system configuration will be updated automatically. 1 Switch on the computer. 2 To enter the SCSI Configuration Utility press Ctrl-C when prompted during the PC's start-up routine. 3 Verify or modify the configuration of your new SCSI hard disk drive. For more information on configuring a SCSI hard disk drive, refer to the SCSI User's Guide. 4 When configuration is complete, exit the SCSI Configuration Utility and reboot the computer to save any changes. 1 Switch on the computer and press F2 when the HP logo appears. 2 In the Setup program, select the Advanced menu, then the IDE Devices submenu. Check that the CD-ROM drive has been detected on the IDE channel. 3 Press F3 to save and exit the program. 1 Switch on the computer and press F2 when the HP logo appears. 2 In the Setup program, select the Advanced menu, then the Floppy Disk Drives submenu, and check that the drive has been detected. 3 Press F3 to save and exit the program. 42