HP Vectra VL800 hp vectra vl800, upgrade and installation guide for desktop mo - Page 40
Replacing the Assembly
View all HP Vectra VL800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
2 Installing and Replacing Hardware Parts in Your PC Replacing the Hard Drive Bay and Speaker Assembly 7 From the front of the PC: (a) push the two plastic clips located on the left-hand side inwards; (b) repeat this procedure for the other two clips on the right-hand side. ➒ a b 8 Unclip the retention clip located on the right-hand side and middle of the hard disk drive bay and speaker assembly. 9 Slide the hard disk drive bay and speaker assembly towards the system board until it is well clear of the chassis edge (located between the hard disk drive bay and speaker assembly and front access cage). 10 Lift the hard disk drive bay and speaker assembly upwards to remove it from the computer. Replacing the Assembly 1 Ensure that there are no cables underneath the hard disk drive bay and speaker assembly. 2 Align the two plastic tabs (control panel side) of the hard disk drive bay and speaker assembly with their associated notches. Retention clip 40