HP Vectra VL800 hp vectra vl800, upgrade and installation guide for desktop mo - Page 44
Replacing the Power Supply Unit, Removing the, Power Supply Unit, Installing the Power, Supply Unit
View all HP Vectra VL800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
2 Installing and Replacing Hardware Parts in Your PC Replacing the Power Supply Unit Replacing the Power Supply Unit WARNING Hewlett-Packard does not support power supply upgrades. This information is provided to help you replace a defective power supply unit. For your safety, only replace a power supply unit with a unit provided by HP support services. Removing the Power Supply Unit 1 Switch off the display and PC. Disconnect all power cables and any LAN or telecommunications cables. 2 Remove the PC's cover (refer to page 24 for instructions). 3 Remove all internal power supply connectors. 4 Remove the two screws located on the rear of the chassis that secure the power supply unit in position. Installing the Power Supply Unit 5 Lift the front of the power supply unit up and move it forwards to disengage the hinge on the rear. 1 Insert the new power supply unit. 2 Secure it in position using the screws you previously removed. 3 Reconnect all internal power supply connectors (there are two connectors on the system board). 4 Replace the PC's cover (refer to page 25). Reconnect all the power and telecommunications cables. 44