HP Vectra VL800 hp vectra vl800, upgrade and installation guide for desktop mo - Page 37
Replacing the CD-ROM (or DVD) Drive, Refer to Removing the Front Access Drive Cage on
View all HP Vectra VL800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
2 Installing and Replacing Hardware Parts in Your PC Replacing the CD-ROM (or DVD) Drive Replacing the CD-ROM (or DVD) Drive Removing the Existing Drive 1 Switch off the display and PC. Disconnect all power cables and any LAN or telecommunications cables. 2 Remove the PC's cover and front bezel (refer to page 24). 3 Refer to "Removing the Front Access Drive Cage" on page 35 for instructions on removing the front access cage. 4 Remove the screws attaching the drive to the cage and slide the drive out of the cage. Installing the New Drive 1 Slide the new drive into the drive tray (with the correct orientation). Ensure that the front of the new device is aligned with the other drive or filler plate. Secure the drive in position using the screws. 2 Put the front access cage back into the PC. Refer to "Replacing the Front Access Drive Cage" on page 36 to complete the installation. 37