HP Vectra VL800 hp vectra vl800, upgrade and installation guide for desktop mo - Page 41
Installing and Replacing Hardware Parts in Your PC, the system board.
View all HP Vectra VL800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
2 Installing and Replacing Hardware Parts in Your PC Replacing the Hard Drive Bay and Speaker Assembly 3 Ensure that the plastic clips on the front of the hard disk drive bay and speaker assembly are lined-up with their associated locations. 4 From the front of the PC, gently push towards you the right-hand side of the hard disk drive bay and speaker assembly until it clicks in place. Repeat this procedure on the left-hand side of the hard disk drive bay and speaker assembly. 5 Reconnect the speaker and control panel cables to their connectors on the system board. 6 Reconnect the data and power cables. Replace the primary hard disk drive, the secondary hard disk drive tray, and their retaining screws. 7 Replace the PC's cover and front bezel (refer to page 25). Reconnect all the power and telecommunications cables. 41