HP Vectra XU 6/XXX HP Vectra VT 6/xxx, Familiarization guide - Page 12

1 Product Overview and Features Product Features Resolution 256 Colors 8 Bits Per Pixel 64 K Colors (Hi-Color) 16.7 M Colors (True- 16.7 M Colors (True- Maximum 16 Bits Per Pixel Color) 24 Bits Per Pixel Color) 32 Bits Per Pixel Refresh Rates1 640 ! 480 2 MB 120 Hz 800 ! 600 2 MB 120 Hz 1024 ! 768 2 MB 4 MB 120 Hz 1152 ! 882 2 MB 4 MB 120 Hz 1280 ! 1024 2 MB 4 MB 8 MB 90 Hz 1600 ! 1200 2 MB 4 MB 8 MB 72 Hz 1. Your display might not support the maximum refresh rates that are shown here. Refer to the User's Guide supplied with the display for details of the refresh rates which it supports. Fast-20 SCSI-2 Interface On the HP Vectra XU 6/xxx PC, data transfer rates of up to 20 MB per second are available, using the 8-bit SCSI bus. Up to seven SCSI devices can be connected on a variety of internal and external connectors. SCSI configured automatically (SCAM) support is provided for SCSI Plug and Play. HP drivers are provided for the following operating systems: Ì OS/2 2.11 Ì Windows NT Ì Windows 3.11 Ì Windows 95 Ì OS/2 Warp Connect (required) (required) (recommended) (recommended) (recommended). IDE Controller The integrated IDE controller supports Enhanced IDE and Standard IDE. It offers data transfer rates of up to 16.7 MB per second. The controller supports up to four IDE devices: two IDE devices can be connected to the primary channel cable, and two to the secondary channel cable. It is possible to connect both fast devices and slow devices on the same channel without affecting the performance of the fast device. Supported Drives The following hard disk drives are supported (the first two are only applicable to the HP Vectra XU 6/xxx PC): Ì 3.5-inch, 1 GB Fast-20 SCSI-2 hard disk drive Ì 3.5-inch, 2 GB Fast-20 SCSI-2 hard disk drive Ì 3.5-inch, 1 GB IDE hard disk drive (D2920A) (D2926A) (D2919A). 8