HP Z558 HP Digital Entertainment Center - User's Guide - Page 168
Video
![]() |
UPC - 882780141766
View all HP Z558 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 168 highlights
Video Find the description that most closely matches your problem, and try the corresponding solution. Problem I am using a TV with the HP Digital Entertainment Center, but I cannot see anything. I cannot see anything on the TV. I can hear it, though. My HDTV displays a distorted screen instead of a blank screen (blue or dark). The screen may be cropped or display dark borders. The HP Digital Entertainment Center doesn't recognize my digital video camera. Solution ■ Check that the correct input source is selected on the TV. ■ Check that the TV is connected to the HP Digital Entertainment Center. See "Video Out to TV" on page 63. ■ Check that the TV Out image is enabled. See "Configuring Video" on page 140. ■ If the Video Output S-video and composite connections are not connected to a TV or Video Input when the HP Digital Entertainment Center is turned on, the S-video and composite jacks will turn off automatically. You must turn off, by pressing and holding down the On/Standby (power) button for 4 seconds, and restart your HP Digital Entertainment Center to ensure Video Out connection to your TV or AV receiver. ■ Check your input switches. ■ Refer to http://www.hp.com/support for additional information on adjusting the display or updating the drivers. ■ If you see a blank screen, you cannot perform recovery or certain activities with HDMI. Change your Video Out connection to VGA, recover your system, and then reconnect the HDMI connection. ■ Connect a monitor to your HP Digital Entertainment Center. See "Video Out to TV and Monitor" on page 68. See "Recognizing the digital video camcorder" on page 111. 162 HP Digital Entertainment Center
![](/manual_guide/products/hewlettpackard-z558-hp-digital-entertainment-center-users-guide-9e17e16/168.png)