HP Z558 HP Digital Entertainment Center - User's Guide - Page 99
Satellite Connection, One Satellite Receiver (NTSC)
![]() |
UPC - 882780141766
View all HP Z558 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Connecting TV Source In Satellite Connection (Location, availability, and number of connectors may vary.) One Satellite Receiver (NTSC) Connect the TV signal source from the satellite receiver into the HP Digital Entertainment Center. If you are using a satellite receiver (sold separately) with S-video or composite video output, do the following: 1 Make sure that a coaxial cable connector from your dish source is plugged into the satellite receiver In connector. 2 Connect a video cable. a Choose a Video Out connector: ■ Coaxial (RF) ■ Video (composite) ■ S-video b Connect the video cable from the satellite receiver back panel video output connector. c Connect the video cable into the HP Digital Entertainment Center back panel TV Source 1 In connector. 3 Connect stereo audio cables (skip this step if using coaxial [RF]): a From the satellite receiver back panel Audio Out right (red) connector and Audio Out left (white) connectors. b Into the HP Digital Entertainment Center back panel TV Source 1 In Audio right (red) and Audio left (white) connectors. 4 Connect the satellite receiver Infrared Transmitter cable (required for signal). See "Infrared Transmitter Connection" on page 97. Connecting TV Source In 93
![](/manual_guide/products/hewlettpackard-z558-hp-digital-entertainment-center-users-guide-9e17e16/99.png)