HP Z558 HP Digital Entertainment Center - User's Guide - Page 95
One Cable TV Box or Digital Cable Receiver (NTSC
UPC - 882780141766
View all HP Z558 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Connecting TV Source In One Cable TV Box or Digital Cable Receiver (NTSC) Connect the NTSC TV signal source from the standard cable TV set-top box or digital cable receiver (sold separately) into the HP Digital Entertainment Center. If you are using a standard set-top box or digital cable receiver with S-video or composite video output, do the following: 1 Make sure that a coaxial cable connector from your cable TV source (wall) is plugged into the set-top box or digital cable receiver In connector. 2 Connect a video cable: a Choose a video out connector: ■ Coaxial (RF) ■ Video (composite) ■ S-video b Connect the video cable from the set-top box or digital cable receiver back panel Video Output connector. c Connect the video cable into the HP Digital Entertainment Center back panel TV Source 1 In connector. 3 Connect stereo audio cables (skip this step if using coaxial [RF]): a From the set-top box or digital cable receiver back panel Audio Out right (red) and Audio Out left (white) connectors. b Into the HP Digital Entertainment Center back panel TV Source 1 In Audio right (red) and Audio left (white) connectors. 4 Connect the set-top box Infrared Transmitter cable (required for signal). See "Infrared Transmitter Connection" on page 97. Connecting TV Source In 89