HP j6700 hp workstation J6700 upgrade instructions (a6056-90000) - Page 24
Removing and Replacing the Real-Time Clock
View all HP j6700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Component Remove/Replacement Component Removal and Replacement Removing and Replacing the Real-Time Clock To remove the real-time clock, you first need to follow the procedure in the section "Front Bezel and Top Cover" of this chapter. After this procedure has been completed, you can remove the real-time clock as shown in Figure 2-14. You may need to rock the real-time clock back and forth to loosen it in its socket. Figure 2-14. Removing the Real-Time Clock Real-time Clock Locator Dot To replace the real-time clock, reverse the above procedure. Note that you should be careful to not bend any of the real-time clock's pins, and you must position the locator dot as shown in Figure 2-14. Once the real-time clock is in place, reverse the procedure in the section "Front Bezel and Top Cover" to replace the top cover. 24 Chapter 2