HP m9040n Getting Started Guide - Page 47

Configuring Audio for Windows Media Center After you have installed, connected, and configured your speakers, follow these steps to configure multichannel audio output for Windows Media Center: 1 Click the Windows Start Button on the taskbar. 2 Click Windows Media Center. 3 Under Tasks, click settings, General, and then click Windows Media Center Setup. 4 Click Set Up Your Speakers. The Welcome to Speaker Setup window opens. 5 Click Next. 6 Choose the speaker connection type, and then click Next. 7 Select the number of speakers, and then click Next. 8 Click Test to test your speakers. 9 Click Finish. Using Headphones Your computer includes a headphone connector (lime green) on the front of the computer. The headphone connector is labeled with a headphones icon. You can also connect headphones to the Line Out connector (lime green) on the back of your computer. Using a 2.1 speaker system with headphones For select models that include a 2.1 speaker system, look for the headphone connector on the right side of the main speaker. When headphones are plugged in, the sound to the speakers and the subwoofer is muted. Using a 5.1 to 7.1 speaker system with headphones For select models that include a 5.1 or higher speaker system, a headphones connector is located on the right side of the control tower. If the control tower displays HP (for headphones), the headphones are enabled, and the sound to the speakers and the subwoofer is muted. Press and hold the On button on the control tower for several seconds to enable sound from the speakers. Press the On button briefly to enable the sound from the headphones. Getting Started Updated Information 43