HP mt20 Administrator Guide 1 - Page 45
Configuration, Advanced, SSH
View all HP mt20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Configuration The following table describes the settings that are available under the Configuration category when editing an XDMCP connection. Option Name Type Address Use font server Font server Configure display Description The connection name. The XDMCP connection type. Valid options are: chooser, query, and broadcast. This value is required if the Type value is set to query. Use a remote X font server instead of locally installed fonts. Font server is not enabled unless the Use font server option is selected. Select to set the display configuration for the connection. If you do not set this configuration, the default configuration will be used. Advanced NOTE: See Advanced connection settings on page 7 for information about the settings available under the Advanced category when editing a connection. SSH NOTE: These settings affect the connection you are currently configuring only. Configuration The following table describes the settings that are available under the Configuration category when editing an SSH connection. Option Name Address Port User name Run application Compression X11 connection forwarding Force TTY allocation Foreground color Description The connection name. The IP address of the remote system. The remote port to use for the connection. The username to use for the connection. The application to run to make the connection. Select this option if you want to compress the data sent between the server and thin client. If the server has an X server on it, select this option to allow the user to open user interfaces from the SSH session and display them locally on the thin client. Select this option and specify a command to initiate a temporary session to run the command. Once the command has completed, the session will terminate. If no command is specified, then the session will run normally as if the option were not selected. The default color of the text in the SSH session. Additional connection types (ThinPro only) 33