HP mt42 Maintenance and Service Guide - Page 50
RTC battery, Remove the RTC battery
View all HP mt42 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
RTC battery Description RTC battery Spare part number 665733-001 Before removing the RTC battery, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 25). 5. Remove the battery (see Battery on page 28). Remove the RTC battery: 1. Remove the RTC battery cable from the system board (1). 2. Lift the mylar cover (2). 3. Using a flat tool, pry the battery out of the socket (3). Reverse this procedure to install the RTC battery. 40 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts