Hisense C1 Mini Projector User Manual - Page 37

Settings Overview Turn on the Console through the Internet Wake on Cast Press button on your remote control and select > Settings > Network > Wake on Cast. You can enable or disable Wake on Cast function which is able to turn on the console by screen casting through mobile devices. Note: • This function may not be applicable in some models/countries/regions. • Enabling this function may result in higher energy consumption. Wake on LAN Press button on your remote control and select Settings > Network > Wake on LAN. With a wired Ethernet connection and enabling Wake on LAN, you can switch on the console from standby and push content to be viewed on the console with a mobile device App supporting the screencast function. Note: • To use this function, make sure your console and mobile device are connected to the same network environment. • Enabling this function may result in higher energy consumption. • This function may not be applicable in some models/countries/regions. Wake on Wireless Network Press button on your remote control and select Settings > Network > Wake on Wireless Network. With a wireless network connection and enabling Wake on Wireless Network, you can switch on the console from standby and push content to be viewed on the console with a mobile device App supporting the screencast function. Note: • To use this function, make sure your console and mobile device are connected to the same network environment. • Enabling this function may result in higher energy consumption. • This function may not be applicable in some models/countries/regions. Related information Connect to a Wired (Ethernet) Network on page 4 Connect to a Wireless Network on page 5 General You can set up system settings. Note: • The menus displayed vary depending on models/countries/regions. Set Time Press button on your remote control and select Settings > System > Time. 36