Hisense DH10019TP1WG Use and Care Guide - Page 11
IMPORTANT, Option 1 Bucket Draining, Option 2 Gravity Draining
![]() |
View all Hisense DH10019TP1WG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
4. Fold down the handle and reinstall the bucket. Option 1 Bucket Draining If a floor drain is not available, or you do not plan to run your dehumidifier continuously, you may want to simply empty the bucket. 1. Grasp the bucket sides to slide out bucket. 2. Lift the bucket up by the handle. IMPORTANT: If the Empty Bucket light comes on, the dehumidifier will not operate. The bucket may need to be emptied or re-installed. NOTE: ■ If the water bucket is removed immediately after turning off the dehumidifier, the water remaining in the heat exchanger may drip inside the water bucket storage area. Remove the water with a soft cloth. ■ While cleaning, do not touch the water level float. ■ Clean the water bucket once a week during use. ■ If the ambient temperature is low, there is less moisture in the air for the product to remove. ■ Unplug the product before removing the water bucket. If the bucket is removed while the product is operating, the compressor will stop. 3. Pour water into a sink or tub. Option 2 Gravity Draining If you plan to run your dehumidifier continuously, you can choose direct draining by attaching a garden hose to the unit. 1. Turn off the dehumidifier and unplug the power supply cord. 2. Uncover the connector cover on the side of the unit. 9
![](/manual_guide/products/hisense-dh10019tp1wg-use-care-guide-42cbb15/11.png)