Hisense DH10019TP1WG Use and Care Guide - Page 9
Quiet, Humidity Level, Digital Display, Power, Fan Speed, Desired Humidity-Mode
View all Hisense DH10019TP1WG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Fan Speed 1. Press FAN to select fan speed. 2. Choose LOW, MED or HIGH. Power Press POWER to turn on or turn off the dehumidifier. ■ LOW-Will reach the desired humidity setting with lower sound level. ■ MED-Will achieve set humidity at normal speed. ■ HIGH-Will reach the desired humidity setting faster. NOTE: Once the humidity set point is reached, the dehumidifier will stop running continuously, and the fan will be off periodically. The fan may periodically turn on, to read the humidity level, without the compressor running. Desired Humidity-Mode 1. Press MODE to select the desired humidity setting. Quiet The dehumidifier will run in lower noise operation. QUIET NOTE: Once the Mode or Fan speed is changed, the dehumidifier will quit Quiet mode automatically. Humidity Level 1. Press the Plus or Minus button to set the desired humidity level. Desired humidity in the digital display will flash for 5 seconds after operation. 2. Choose Auto Dry, Continuous/Super or Manual Set. ■ AUTO DRY: The dehumidifier will operate in dry mode only. The Desired Humidity is set to 50% automatically. The Fan Speed can be adjusted. The Desired Humidity can not be adjusted. ■ CONTINUOUS/SUPER DRY: The Desired Humidity is set to 30% automatically. The Fan Speed can be adjusted. The Desired Humidity can not be adjusted. ■ MANUAL SET: The dehumidifier will operate at the selected fan speed and desired humidity level. If the humidity level of the room is higher than the desired humidity setting, the compressor will turn on. If the humidity level of the room is lower than the desired humidity setting, the compressor will turn off, as well as the fan. NOTE: The de-icing function will turn off the compressor if a low temperature condition occurs. Pressing the MODE button or the plus or minus button will not increase or decrease the amount of moisture removed. When the de-icer senses then correct operating temperature, the compressor will cycle back on. Some freezing is normal will dehumidifiers are used at low temperatures. 2. Actual room humidity will be displayed after 5 seconds of flashing the desired humidity. NOTE: Humidity can only be adjusted manually in Manual Set mode. In Continuous/Super Dry and Auto Dry mode, humidity level is set automatically. Digital Display Display shows relative humidity or time (depending on setting). 1. When the dehumidifier operates in Manual Set mode, the display shows the relative humidity of the room. 2. When the timer is selected, the display shows the time when the dehumidifier will turn on or turn off operates, depending on the setting. NOTE: The humidity displayed is only for reference. For accurate humidity, please check a hygrometer. 7