Hisense DH10019TP1WG Use and Care Guide - Page 3
Table, Contents - model
View all Hisense DH10019TP1WG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
TABLE OF CONTENTS PRODUCT OVERVIEW 1 DEHUMIDIFIER SAFETY 2 INSTALLATION REQUIREMENTS 5 Electrical Requirements 5 Location Requirements 5 DEHUMIDIFIER USE 6 Setting the Controls 6 Draining the Dehumidifier 9 Normal Sounds 12 DEHUMIDIFIER CARE 13 Cleaning the Air Filter 13 Cleaning the Dehumidifier 13 TROUBLE SHOOTING 14 Handle Air Intake Grill and Air Filter Control Panel User Manual Quick Connect Hose (for pump function model only) Bucket Power Plug NOTE: The figures in this manual are based on the external view of a standard model. They may differ from that dehumidifier you have selected. DC Inverter Dehumidifier DOE Test Procedure Instruction 1. Press POWER button to turn on the DC Inverter dehumidifier. 2. Hold the CLEAN FILTER and PLUS (+) button for about 3 seconds at the same time, then the unit will display F1 and operate Test Mode 1 according to the 10 CFR 430, Subpart B, Appendix X test procedure. 3. Hold the CLEAN FILTER and MINUS (-) button for about 3 seconds at the same time, then the unit will display F2 and operate Test Mode 2 according to the 10 CFR 430, Subpart B, Appendix X1 test procedure. 4. Please press POWER button or unplug the power supply to quit the Test Mode. NOTE: *This Test Procedure is for DC Inverter Dehumidifier only. *All the buttons will have no feedback in the Test Mode except POWER, CLEAN FILTER, PLUS (+) and MINUS (-) buttons.