Hisense DH10019TP1WG Use and Care Guide - Page 14

Water filter cleaning (For inverter model only) 1. Unplug the unit before cleaning it. After every 3 months of usage, the water filter need to be cleaned for a smooth water pump running. 2. Remove the bucket. 4. Clean the water filter with soft brush. ■ If the filter is very dirty, wash it in water and a neutral detergent. ■ Clean the water filter every 3 months. 3. Remove the plastic nut, sealing bolt and take the filter off. NOTE: Before remove the filter, please put a draining dish under the unit and make sure there is not water draining from the port. 5. Re-install the filter, filter sealing bolt and plastic nut back to the unit, make sure the filter is installed to the right position. Step 1 Step 2 Step 3 Filter Sealing bolt Plastic nut Close Water Filter position Step 3 Step 2 Step 1 Filter Sealing bolt Plastic nut 6. Re-install the bucket to the unit. Open Take care not to injure hands while disassemble and re-install the water filter parts. NOTE: If the unit will not used for a certain period of time, please clean the water filter, drain the dehumidfier completely. And make sure re-install the water filter parts. Service calls to clean the water filter are not covered under the product warranty. Normal Sounds When your dehumidifier is operating normally, you may hear sounds such as: ■ Compressor sounds, which may be loud. ■ Air movement from the fan. ■ Pump sounds, which may be loud. ■ Clicking sounds when the dehumidifier or compressor turns off and on. 12