Hisense DH10019TP1WG Use and Care Guide - Page 12

3. Remove bucket. 4. Attach a garden hose to the drain hose connector on the inside of the dehumidifier. Securely attach the hose to be sure there is no water leak. NOTE: ■ The garden hose sold separately. ■ The connection is designed for North American garden hoses only. A B A. Garden hose B. Drain hose connector IMPORTANT: In North America the garden hose connectors are 3/4" diameter straight (non-tapered) thread with a pitch of 11.5 threads per inch (male part has an outer diameter of 1 1/16 inches (26.99mm). Option 3 PUMP-Drain (for Pump function model only) This feature can help to pump water horizontally or vertically with a 16 feet (487.68cm) hose included. You can also pump water to a floor drain, out a window or anywhere you think suitable. NOTE: There are two types connectors, please choose the operating instructions for your model to use. CONNECTOR TYPE 1 NOTE: You must connect the drain hose (with connector B) to drain hose connector A before pressing Pump button. If the pump does not function properly, see "Trouble shooting" for direction. Drain hose connector A Take care not to injure hands while connecting the hose. 5. Place the other end of garden hose into a floor drain. Check to see that the hose lies flat and is in the drain. Make sure the draining end of the hose is on a lower level than the hose connection to the dehumidifier. The hose should not be kinked or pinched. Drain hose connector B Drain hose 1. To connect the drain hose to the unit, push drain hose connector B into the connector A. 6. Reinstall bucket. NOTE: ■ To use the bucket without the garden hose, simply remove the garden hose, then reinstall bucket. ■ The bucket must be installed and properly aligned for the dehumidifier to operate with or without a garden hose connected. 10