Hitachi 7K400 Specifications - Page 109
Advanced Power Management feature set APM
![]() |
UPC - 000053412935
View all Hitachi 7K400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
10.14 Advanced Power Management feature set (APM) This feature allows the host to select an advanced power management level. The advanced power management level is a scale from the lowest power consumption setting of 01h to the maximum performance level of FEh. Device performance may increase with increasing advanced power management levels. Device power consumption may increase with increasing advanced power management levels. The advanced power management levels contain discrete bands described in the section of SET FEATURES command in detail. This feature set uses the following functions: • A SET FEATURES subcommand to enable Advanced Power Management • A SET FEATURES subcommand to disable Advanced Power Management Advanced Power Management is independent of the Standby timer setting. If both Advanced Power Management and the Standby timer are set, the device will go to the Standby state when the timer times out or the device's Advanced Power Management algorithm indicates that the Standby state should be entered. The IDENTIFY DEVICE response word 83, bit 3 indicates that Advanced Power Management feature is supported if set. Word 86, bit 3 indicates that Advanced Power Management is enabled if set. Word 91, bits 7-0 contains the current Advanced Power Management level if it is enabled. Deskstar 7K400 Hard Disk Drive Specification 95
![](/manual_guide/products/hitachi-7k400-specifications-548f643/109.png)