Hitachi GD8000 User Guide - Page 35
Battery Tips
View all Hitachi GD8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
GD8000 User Guide Operating with Battery Power Low-Power States Your computer can enter three different low-power states to conserve power: Standby/Sleep, Hibernate and Power Off. These states can be entered manually or after a period of inactivity. From the Power Saver or DynaPower utilities, you can configure the Power Button, Sleep Button (FN+F3) and Lid Switch to initiate any of the low-power states. Standby/Sleep Most system devices are powered off, but the contents of system memory are retained. Standby/Sleep is sometimes referred to as Suspend to RAM. When the computer returns from Standby mode, the desktop appears with the same files and programs open as when the computer was suspended. Resume time is very quick. For Windows XP: Select Start, Turn off computer, Stand by to enter Standby/Sleep mode. For Windows Vista and Windows 7: Select Start and click on the arrow next to the Shut down menu. Then select Sleep to enter Standby/Sleep mode. Hibernate Hibernate, or Suspend to Disk, is similar to Standby except the current state of the computer is copied to the hard disk in a special file. Then, all devices in the computer are turned off. When the computer returns from hibernation, the desktop appears with the same files and programs open as when the computer was suspended. Hibernation saves more power than Standby, but takes slightly longer to resume. For Windows XP: On the System tray area of the Taskbar, right click the Power Saver icon , then select Configure Power Settings and make your desired changes. For Windows Vista and Windows 7: On the System tray area of the Taskbar, right click the DynaPower icon, then select DynaPower Grid and make your desired changes. Power Off All applications are closed and the system shuts down. To power off the computer select Start, Shut Down, Shut down. Then click OK. Battery Tips Tip 1. Avoid excessive heat and cold Your battery will last longer during the day if it is used, charged and stored between 50°F and 86°F (10°C and 30°C). Charge the battery nightly where the temperature will remain around 68°F (20°C). Your battery may not last as long through the day if you charge it at higher or lower temperatures. Allow unrestricted airflow while the computer is connected to external power. Make sure that the fan inlet and outlet are unobstructed. Avoid exposure to extreme temperatures for long periods as this can shorten battery charge life or damage the battery. How your battery behaves in warm conditions To prevent possible battery damage, the system may not allow a charge if the battery temperature is above 122°F (50°C), such as in a closed, unattended vehicle during the summer. In this case, the Battery LED may indicate the computer has stopped charging your battery; however, your battery may not be fully charged. If possible, turn off or suspend your computer while the battery is charging in a warm environment to avoid over-heating. In warmer temperatures, your battery may take much longer to fully charge. How your battery behaves in cold conditions When using a battery in cold conditions, the battery capacity may drain significantly faster than normal. To prevent possible battery damage, the system will not allow a charge if the battery temperature is below 41°F (5°C), such as in a closed, unattended vehicle during the winter. In this case, the Battery LED may indicate the computer has stopped charging your battery; however, your battery may not be fully charged In cooler temperatures, your battery can take much longer to fully charge. Tip 2. Prevent wasted power Manually turn off or suspend your computer whenever you are not using it. Reduce the screen brightness. Decrease brightness by pushing Fn + F6. Increase it by pushing Fn + F7. Enable the display's automatic dimming feature. Use the AC adapter or vehicle adapter whenever possible. Use the Power Saver utility (Windows XP) to help save power or the DynaPower utility (Windows Vista and Windows 7). When running on battery power, make sure your system suspends automatically after a few minutes of inactivity. PC Cards, radios, custom applications, or modified system settings may affect this. Remove PC Cards and unplug peripherals when you are not using them. They may draw power from the system even when not in use. Avoid operating the fax/modem, or audio and video applications when using battery power. Operating a fax/modem, video, or audio equipment increases the computer's power requirements Don't use screen savers as they draw excessive current, especially "3D" screen savers. General Dynamics Itronix | 72-0137-003