Hitachi GD8000 User Guide - Page 55

Keyboard and Mouse Troubleshooting, Modem Troubleshooting, PC Cards

Page 55 highlights

GD8000 User Guide Troubleshooting erly, the Power LED on the AC adapter should be lit as well as the External Power LED on the GoBook MR-1. „„ If the AC adapter is connected but the unit will still not turn on, make sure the electrical outlet you are using is working „„ Check to make sure the battery is installed and charged properly „„ If the battery does not begin charging, perform the following: 1. Remove the battery. 2. Connect the AC adapter. 3. Turn on the computer by pressing the Power Button. 4. Reinstall the battery. The Battery LED is a steady blue while the battery is charging. Keyboard and Mouse Troubleshooting Something unexpected happens when I press a key You may have pressed a key combination that performs a Windows function. Make sure you are pressing the correct keys for the application you are running. Incorrect characters appear on the screen when I press certain keys You may be in Num Lock mode. Press Num Lock to toggle Num Lock mode off. Num Lock is on the top row of buttons on your keyboard next to the F12 key. I have difficulty double-clicking the mouse fast enough For Windows XP: Select Start, Control Panel, Mouse. The Buttons tab contains the setting for the double-click speed. For Windows Vista: Select Start, Control Panel, Hardware and Sound. Then select Mouse to configure double-clicking speed and other options. Modem Troubleshooting The modem doesn't work „„ When you first try to use HyperTerminal or similar application, the system responds with a message asking if you want to install the modem. Answer "Yes" to this question and follow the instructions on the screen to install it. „„ Make sure the communication settings are correct in your application. Refer to the online help for your application. NOTE HyperTerminal is not available with Windows Vista or Windows 7. The modem doesn't dial a number „„ If you are using an external modem, make sure the cables are attached correctly. „„ Make sure your communications parameters are correct in your application. Refer to the online help for your application. The modem dials and receives an answer but does not establish a connection „„ You may have incorrect parameters selected for your application to talk with the remote modem. Refer to the online help for your application. „„ You may need to adjust your modem's baud rate or protocol selection. PC Cards I can't remove the PC card „„ Press the ejector button located inside the PC card door on the side of the computer. The button will pop out. Press the ejector button again to eject the PC card. Slide the card out. „„ If the ejector button malfunctions when you press it, release the button and then press it again. Read Error If a memory card that is not properly formatted is installed in the PC Card slot, it will cause this error. For Windows 7: 1. Select Start, Control Panel, Hardware and Sound. 2. Under Devices and Printers select Mouse.This will bring you to the Mouse Properties window. 3. On the Buttons tab use the Devices drop-down menu to select your mouse. Then you can set double-click speed. The computer locks up when I remove the PC card Before you remove the card, select the PC card icon ( or ) on the taskbar (in the tray area near the clock in the lower right corner) and choose "Stop [card name] card." General Dynamics Itronix | 72-0137-003

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57

General Dynamics Itronix | 72-0137-003
GD8000 User Guide
Troubleshooting
erly, the Power LED on the AC adapter should be lit as well as
the External Power LED
on the GoBook MR-1.
±
±
If the AC adapter is connected but the unit will still not turn on,
make sure the electrical outlet you are using is working
±
±
Check to make sure the battery is installed and charged properly
±
±
If the battery does not begin charging, perform the following:
1.
Remove the battery
.
2. Connect the AC adapter.
3. Turn on the computer by pressing the
POWER BUTTON
.
4. Reinstall the battery. The Battery LED
is a steady blue
while the battery is charging.
Keyboard and Mouse Troubleshooting
Something unexpected happens when I press a key
You may have pressed a key combination that performs a
Windows function.
Make sure you are pressing the correct
keys for the application you are running.
Incorrect characters appear on the screen when I
press certain keys
You may be in Num Lock mode. Press
NUM LOCK
to toggle
Num Lock
mode off.
NUM LOCK
is on the top row of buttons
on your keyboard next to the
F12
key.
I have difficulty double-clicking the mouse fast
enough
For Windows XP:
Select
Start, Control Panel, Mouse
.
The
Buttons
tab contains
the setting for the double-click speed.
For Windows Vista:
Select
Start, Control Panel, Hardware and Sound
.
Then select
Mouse
to configure double-clicking speed and other options.
For Windows 7:
1.
Select
Start, Control Panel, Hardware and Sound
.
2.
Under
Devices and Printers
select
Mouse
. This will bring you
to the
Mouse Properties
window.
3.
On the
Buttons
tab use the
Devices
drop-down menu to select
your mouse.
Then you can set double-click speed.
Modem Troubleshooting
The modem doesn’t work
±
±
When you first try to use
HyperTerminal
or similar application,
the system responds with a message asking if you want to install
the modem.
Answer “
Yes
” to this question and follow the
instructions on the screen to install it.
±
±
Make sure the communication settings are correct in your
application.
Refer to the online help for your application.
NOTE
HyperTerminal
is not available with Windows Vista or
Windows 7.
The modem doesn’t dial a number
±
±
If you are using an external modem, make sure the cables are
attached correctly.
±
±
Make sure your communications parameters are correct in your
application. Refer to the online help for your application.
The modem dials and receives an answer but does
not establish a connection
±
±
You may have incorrect parameters selected for your application
to talk with the remote modem.
Refer to the online help for your
application.
±
±
You may need to adjust your modem’s baud rate or protocol
selection.
PC Cards
I can’t remove the PC card
±
±
Press the ejector button located inside the PC card door on the
side of the computer. The button will pop out. Press the ejector
button again to eject the PC card.
Slide the card out.
±
±
If the ejector button malfunctions when you press it, release the
button and then press it again.
Read Error
If a memory card that is not properly formatted is installed in
the PC Card slot, it will cause this error.
The computer locks up when I remove the PC card
Before you remove the card, select the PC card icon (
or
)
on the taskbar (in the tray area near the clock in the lower right
corner) and choose “
Stop [card name] card
.”