Hitachi NT65MA2 Instruction Manual - Page 23
Changing The Exhaust Direction, Using The Nose Cap - accessories
UPC - 717709007727
View all Hitachi NT65MA2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
English CHANGING THE EXHAUST DIRECTION WARNING ● When changing the exhaust direction, be sure to remove your finger from the trigger and disconnect the air hose from the nailer. The direction of the exhaust vent can be changed by turning the top cover. Exhaust Vent Top Cover USING THE NOSE CAP WARNING ● When attaching or detaching the nose cap, be sure to remove your finger from the trigger and disconnect the air hose from the nailer. If you like to protect the surface of workpiece against scratches or markings made by the push lever, attach the accessory nose cap to the push lever. 1 DISCONNECT AIR HOSE FROM NAILER. 2 Put the nose cap to the toe of the push lever. 3 The nose cap is marked to indicate the exit point of the nail, making alignment easier. Nose Cap 4 When not using the nose cap, secure in the storage compartment located on the reverse side of the magazine. 2 NOTE: ● The nose cap may reduce nailing depth due to its thickness. Re-adjustment of nailing depth is required. 1 Disconnect Push air hose Lever Magazine Nose Cap 23