Hitachi NV65AH Instruction Manual - Page 16

English Nail guide Nail Stopper (A) Nail Stopper (B) Shaft Feeder Nose 4 Lubricate the feeding surfaces of the nose and the nail guide after cleaning. This promotes smooth operation and prevents rust. 4. Inspecting the magazine 1 DISCONNECT AIR HOSE. 2 Clean the magazine. Remove dust or wooden tips which may have accumulated in the magazine. 5. Storing ⅜ When not in use for an extended period, apply a thin coat of the lubricant to the steel parts to avoid rust. ⅜ Do not store the Nailer in a cold weather environment. Keep the Nailer in a warm area. ⅜ When not in use, the Nailer should be stored in a warm and dry place. Keep out of reach children. 6. WARNING LABEL Change the WARNING LABEL if missing or damaged. A new WARNING LABEL is available from a Hitachi authorized service center. SERVICE AND REPAIRS WARNING ⅷ Only service personnel trained by Hitachi, distributor or employer shall repair the Nailer. ⅷ Use only parts supplied or recommended by Hitachi for repair. All quality Nailers will eventually require servicing or replacement of parts because of wear from normal use. NOTE: Specifications are subject to change without any obligation on the part of HITACHI. Warning Label 7. Maintenance chart (See page 17) 8. Operator troubleshooting (See page 17) - 16 -