Honeywell T8600D Owner's Manual - Page 10

DELUXE PROGRAMMABLE THERMOSTAT OPERATING THE DELUXE PROGRAMMABLE THERMOSTAT Setting Temporary Temperatures Changing Temperature Setting Until the Next Program Period Press increase s or decrease t key until the desired temperature setpoint is displayed. NOTE: If s or t appear under the temperature display, it means that both the heating and cooling setpoints are being adjusted. Tapping the key will change both the heat and cool setpoints by one degree. Press after the desired setpoint is reached to check the setpoints. Run Program Set Current Day/Time Hold Temp Day Daylight Time Time Wake Set Program Leave Return Heat/Cool Settings Copy System Sleep Fan Setting Heat M14650 NOTE: The temporary temperature setting is displayed for approximately 3 seconds. The setting is cancelled when the next period starts or when Run Program is pressed. Changing Temperature Setting Indefinitely 1. Press Hold Temp. Setting System Heat Hold Temp Run Program Set Current Day/Time Hold Temp Day Daylight Time Time Wake Set Program Leave Return Heat/Cool Settings Copy System Sleep Fan Heat Fan Auto M14651 2. Press increase s or decrease t key to change the setting, if desired. Setting System Heat Run Program Set Current Day/Time Hold Temp Day Daylight Time Time Wake Set Program Leave Return Heat/Cool Settings Copy System Sleep Fan Fan Heat Auto M14652 3. Press Heat/Cool Settings to change between heat and cool settings. Heat/Cool Settings Run Program Set Current Day/Time Hold Temp Day Daylight Time Time Wake Set Program Leave Return Heat/Cool Settings Copy System Sleep Fan Setting Cool M14653 69-1400-1 10