Honeywell T8600D Owner's Manual - Page 6

DELUXE PROGRAMMABLE THERMOSTAT Programming the First Day Start by programming the Wake time and temperature (and fan operation on select models) for any one day: 1. Press Wake. Wake Run Program Set Current Day/Time Hold Temp Day Daylight Time Time Wake Set Program Leave Return Heat/Cool Settings Copy System Sleep Fan Set Program Tue Wake 2. Press Day until the desired day is displayed. Setting System Heat AM Fan Heat Auto M14635 3. Set Program AM Setting System Heat Day Run Program Set Current Day/Time Hold Temp Day Daylight Time Time Wake Set Program Leave Return Heat/Cool Settings Copy System Sleep Fan Mon Wake Fan Heat Auto M14636 Press Time s or Time t until the desired Wake time is displayed. NOTE: The program times are in fifteen minute intervals. (Example: 8:00, 8:15, 8:30). Time Run Program Set Current Day/Time Hold Temp Day Daylight Time Time Wake Set Program Leave Return Heat/Cool Settings Copy System Sleep Fan Set Program Mon Wake Setting System Heat AM Fan Heat Auto M14637 4. Press increase s or decrease t key until the desired Wake temperature is dis- played. NOTE: The setpoint temperature range is 40 to 90°F (7 to 31°C) for heating and 45 to 99°F (9 to 37°C) for cooling. Run Program Set Current Day/Time Hold Temp Day Daylight Time Time Wake Set Program Leave Return Heat/Cool Settings Copy System Sleep Fan Set Program Mon Wake Setting System Heat AM Fan Heat Auto M14638 NOTE: Press Fan to modify fan operation. Auto means the fan will run only when the heating or cooling equipment is operating. On means the fan will run continuously for the entire period. 69-1400-1 6