Honeywell T8600D Owner's Manual - Page 11
Changing Temperature Setting Until a Designated Day and Period
View all Honeywell T8600D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
DELUXE PROGRAMMABLE THERMOSTAT 4. Press increase s or decrease t key to adjust temperature settings. Run Program Set Current Day/Time Hold Temp Day Daylight Time Time Wake Set Program Leave Return Heat/Cool Settings Copy System Sleep Fan Setting Cool M14654 NOTE: The display changes from the setpoint to the room temperature after approximately 3 seconds. 5. Press Run Program to cancel the Hold and to return to the program. Changing Temperature Setting Until a Designated Day and Period 1. Press Hold Temp twice. Setting System Heat Hold Temp Run Program Set Current Day/Time Hold Temp Day Daylight Time Time Wake Set Program Leave Return Heat/Cool Settings Copy System Sleep Fan Hold for Wake Days Heat Fan Auto M14655 2. Press Time s or Time t until the desired number of days is displayed (1 to 255 days). (Example: 18 = Hold will override the daily programs for 18 days) Time Run Program Set Current Day/Time Hold Temp Day Daylight Time Time Wake Set Program Leave Return Heat/Cool Settings Copy System Sleep Fan Hold for Wake Setting System Heat Days Fan Heat Auto M14656 3. Press Wake, Leave, Return or Sleep to select the period the program will start. (Example: Return = thermostat will stop the Hold at the Return period start time) Setting System Heat Return Run Program Set Current Day/Time Hold Temp Day Daylight Time Time Wake Set Program Leave Return Heat/Cool Settings Copy System Sleep Fan Hold for Days Return Fan Heat Auto M14657 4. Press increase s or decrease t key to adjust the temperature setting, if desired. (Example: Heat 54° = heating equipment will operate when the room tempera- ture is below 54°F) Run Program Set Current Day/Time Hold Temp Day Daylight Time Time Wake Set Program Leave Return Heat/Cool Settings Copy System Sleep Fan Hold for Days Return Setting System Heat Heat Fan Auto M14658 NOTE: When the System is set for Auto, both heat and cool settings are needed. If the System is set for Heat, only the Heat setpoint is needed or if Cool is selected, only the Cool setpoint is needed. 11 69-1400-1