Honeywell T8600D Owner's Manual - Page 5

DELUXE PROGRAMMABLE THERMOSTAT Setting the Current Day and Time IMPORTANT Always press the keys with your fingertip or similar blunt tool. Sharp instruments like pens and pencil points can damage the keyboard. 1. Press Set Current Day/Time. NOTE: On initial power up or after an extended power loss, 1:00 pm flashes on the display until a key is pressed. Set Current Day/Time Run Program Set Current Day/Time Hold Temp Day Daylight Time Time Wake Set Program Leave Return Heat/Cool Settings Copy System Sleep Fan Mon Set Day/Time PM M14619 2. Press Day until the current day is displayed. NOTE: Sun = Sunday, Mon = Monday, Tue = Tuesday, Wed = Wednesday, Thu = Thursday, Fri = Friday, Sat = Saturday. Set Day/Time Day Run Program Set Current Day/Time Hold Temp Day Daylight Time Time Wake Set Program Leave Return Heat/Cool Settings Copy System Sleep Fan Tue PM M14620 3. Press Time s or Time t until the current time is displayed. NOTE: Tapping the Set Current Day/Time will change the time in one hour increments. Time Run Program Set Current Day/Time Hold Temp Day Daylight Time Time Wake Set Program Leave Return Heat/Cool Settings Copy System Sleep Fan Set Day/Time AM Tue M14621 NOTE: If the current time is Daylight Savings Time, press Daylight Time until DST is displayed. Daylight Time Run Program Set Current Day/Time Hold Temp Day Daylight Time Time Wake Set Program Leave Return Heat/Cool Settings Copy System Sleep Fan 4. Press Run Program. Set Day/Time AM Tue DST M14622 Run Program Run Program Set Current Day/Time Hold Temp Day Daylight Time Time Wake Set Program Leave Return Heat/Cool Settings Copy System Sleep Fan 5 Tue Wake AM Room DST System Heat Fan Auto M14623 69-1400-1