Honeywell T8600D Owner's Manual - Page 7

DELUXE PROGRAMMABLE THERMOSTAT 5. Press Heat/Cool Settings to switch to other system temperature setpoint. NOTE: The program times are the same for both heating and cooling. Heat/Cool Settings Run Program Set Current Day/Time Hold Temp Day Daylight Time Time Wake Set Program Leave Return Heat/Cool Settings Copy System Sleep Fan Set Program Mon Wake AM Setting System Heat Fan Cool Auto M14639 6. Press increase s or decrease t key until the desired temperature setpoint is dis- played. Set Program AM Setting System Heat Run Program Set Current Day/Time Hold Temp Day Daylight Time Time Wake Set Program Leave Return Heat/Cool Settings Copy System Sleep Fan Mon Wake Fan Cool Auto M14640 7. Press Leave, Return or Sleep and repeat steps 3, 4, 5 and 6 for programming the rest of the day. The first day is now programmed. IMPORTANT Repeat steps 1 through 7 for each day of the week that has a different program than the first day. Refer to Copying a Day section to copy any program day to another. 8. Press Run Program when all days are programmed. Run Program Run Program Set Current Day/Time Hold Temp Day Daylight Time Time Wake Set Program Leave Return Heat/Cool Settings Copy System Sleep Fan Tue Wake AM Room DST System Heat Fan Auto M14641 7 69-1400-1