Honeywell T8600D Owner's Manual - Page 9

DELUXE PROGRAMMABLE THERMOSTAT Clearing Program Period NOTE: The thermostat must be in the program mode to use the clear feature. Go to step 2 if the thermostat is already in the program mode. 1. Press Wake, Leave, Return or Sleep. Leave Run Program Set Current Day/Time Hold Temp Day Daylight Time Time Wake Set Program Leave Return Heat/Cool Settings Copy System Sleep Fan Set Program Mon Leave 2. Press Day until the desired day is displayed. Setting System Heat AM Heat Fan On M14647 Day Run Program Set Current Day/Time Hold Temp Day Daylight Time Time Wake Set Program Leave Return Heat/Cool Settings Copy System Sleep Fan Set Program AM Sat Leave Setting System Heat Heat Fan On M14648 3. Press Leave, Return or Sleep until the start time and temperature setting are cleared (approximately 3 seconds) NOTE: Wake cannot be cleared.. Leave Run Program Set Current Day/Time Hold Temp Day Daylight Time Time Wake Set Program Leave Return Heat/Cool Settings Copy System Sleep Fan Set Program Sat Leave Setting Heat M14649 4. Repeat steps 2 and 3 for all the periods to be cleared. 5. Press Run Program. 9 69-1400-1