Honeywell TB7100A1000 Installation Instructions - Page 1

TB7100A1000 MultiPRO™ Multispeed and Multipurpose Thermostat APPLICATION INSTALLATION INSTRUCTIONS The TB7100A1000 MultiPRO™ Multispeed and Multipurpose Thermostat provides electronic control of 24 Vac heating and cooling systems. See Table 1 for a description. Feature Powering Methods System Types Changeover System Setting Fan Setting Fan Speeds Remote Setback Fan Ramping Algorithm Table 1. TB7100A Thermostat Description. Description • Battery only • 24 Vac only • 24 Vac with battery backup • Conventional (1 Heat, 1 Cool stages) • Heat Pump (up to 2 Heat,1 Cool stages) • 2 Pipe Fan Coil • 2 Pipe Fan Coil with Auxiliary Heat • 4 Pipe Fan Coil • PTAC (up to 2 Heat, 1 Cool) Manual or automatic changeover selectable Heat-Off-Cool-Auto Auto, On Low, Medium, High Remote Setback Input for occupancy sensor or DDC setback VersaSpeed™ Fan Ramping Algorithm for automatic fan speed selection (fan coil and PTAC applications) MERCURY NOTICE If this control is replacing a control that contains mercury in a sealed tube, do not place your old control in the trash. Dispose of properly. Contact your local waste management authority for instructions regarding recycling and the proper disposal of an old control. INSTALLATION When Installing this Product... 1. Read these instructions carefully. Failure to follow them could damage the product or cause a hazardous condition. 2. Check ratings given in instructions and on the product to ensure the product is suitable for your application. 3. Installer must be a trained, experienced service technician. 4. After installation is complete, check out product operation as provided in these instructions. 62-0273-05