Hoover F5835900 Owners Manual - Page 11

To clean floor Read Before you begin cleaning instructions on page 10. Do not use the SteamVac deep cleaner on hardwood floors. Fill clean solution tank with HOOVER Bare Floor Cleaner (available at additional cost if not included with your model) according to instructions on pages 7 and 8. Do not use any type of wax with your SteamVac TM deep cleaner. Dry hands and plug deep cleaner into a properly grounded outlet. Step on handle release pedal and lower handle to operating position; turn deep cleaner ON. To release solution, press trigger. Slowly move deep cleaner forward and backward over area to be cleaned. To pick up dirty solution, release trigger and slowly move deep cleaner over area where solution has just been dispersed. Use both forward and reverse strokes. Empty recovery tank when the motor sound becomes higher pitched and there is a loss in suction (see "Automatic shut-off", page 7). When finished cleaning, follow "After cleaning" instructions on page 9. Remove attachment from nozzle and rinse in clear water. Do not remove plastic screen or foam from attachment. A B A. Powered hand tool has rotating brushes for extra scrubbing action on small carpet areas, carpeted stairs and upholstery. B. Stair/upholstery nozzle has a built-in brush to help provide the scrubbing action some spots may need for removal. How to attach hose Disconnect deep cleaner from electrical outlet. 1. To prevent possible leaking, remove clean solution tank by pressing down on tank handle (C) and pulling forward; set tank aside (do not set tank on furniture). Remove hose from storage rack. 2. Step on handle release pedal (D) and lower deep cleaner handle until it rests on the floor. Unlatch back part of recovery tank and remove lid. 3. Remove recovery tank front panel (E) by sliding it straight up. 4. Replace panel with converter (F). Slide converter halfway down opening until it is firmly in place. Continued -_ 11