Hoover F5835900 Owners Manual - Page 6

Deep cleaner description 15 The assembled deep cleaner will look like the drawing. 1. Hand grip 2. Solution trigger: press to release clean solution. 3. Cord clip: place cord in clip to keep it out of the way when using cleaner 4. Hose 5. Hose holder: wrap hose around holder and hooks for storage. 6. Hose hooks 7. Cord hooks: wrap cord around hooks for storage. The top hook can be rotated right or left for quick and easy cord release. 8. Powered hand tool 9. Carrying handle 10. Clean solution tank handle 11. Clean solution tank cap/ measuring cup 12. Clean solution tank: holds cleaning solution. 13. Recovery tank lid 14. Recovery tank: holds dirty solution. 15. Recovery tank front panel 16. Hood 17. Nozzle 18. Upholstery and stair clean- ing connection: push door open to connect stair/upholstery nozzle "solution tube". 19. Recovery tank latches: one on each side of tank. 20. ON/OFF pedal 21. Handle release pedal: step on pedal to lower handle to operating (floor) position. 22. Bare floor attachment 23. Stair/upholstery nozzle This deep cleaner is intended for household use. Operate deep cleaner only at voltage specified on data plate on back of cleaner. Plug deep cleaner Into a properly grounded outlet. m ON/OFF pedal & Handle release pedal Step on pedal (A) to turn deep cleaner on. Step on pedal again to turn deep cleaner off. Step on pedal (B) to lower handle to operating position. Handle does not lock into a single position but "floats" to allow convenient operation. To transport To move your deep cleaner from room to room put handle in upright and locked position tilt deep cleaner back on wheels and push forward. The deep cleaner may also be lifted by placing a hand under the clean solution tank handle as shown.