Husqvarna 220iL without battery and charger Owner Manual - Page 14

To operate the product To trim the grass • Hold the trimmer head immediately above the ground at an angle. Do not push the trimmer line into the grass. 3. Move the product from side to side when you cut grass. Use full speed. To clear grass 1. Keep the trimmer head above the ground. 2. Tilt the trimmer head. 3. Cut with the end of the trimmer line around objects in the work area. CAUTION: Cut grass. Other objects that are hit by the trimmer line, increases the wear on the trimmer line. To cut the grass 1. Make sure that the trimmer line is parallel to the ground when you cut the grass. 2. Do not push the trimmer head to the ground. This can cause damage to the product. To sweep the grass The airflow from the rotating trimmer line can be used to remove cut grass from an area. 1. Hold the trimmer head and the trimmer line parallel to the ground and above the ground. 2. Apply full throttle. 3. Move the trimmer head from side to side and sweep the grass. WARNING: Clean the trimmer head cover each time you assemble new trimmer line to prevent unbalance and vibrations in the handles. Also do a check of the other parts of the trimmer head and clean it if necessary. To extend the trimmer line • When the trimmer line becomes short during operation, tap the trimmer head on a hard, flat surface to extend more trimmer line out. You must operate the product at full speed to get the best result. 14 1752 - 001 - 03.11.2021