Husqvarna 220iL without battery and charger Owner Manual - Page 17

Troubleshooting

Get Husqvarna 220iL without battery and charger PDF manuals and user guides View all Husqvarna 220iL without battery and charger manuals
Add to My Manuals
Save this manual to your list of manuals

Page 17 highlights

3. Continue to turn the the top half of the trimmer head until the triangles (C) align. 8. Pull the trimmer line through the trimmer head until there is an equal length of trimmer line on each side. 9. Hold the trimmer head lower half stable with one hand. 10. Use your opposite hand to turn the top half counterclockwise. C 4. Remove and discard the remaining trimmer line, if there is. 5. Cut approximately 5.5 m/18 ft of new trimmer line. 6. Put one end of the trimmer line into one of the holes. 7. Push the trimmer line through the trimmer head and through the opposite hole. 11. Continue to turn the knob until approximately 127 mm/5 in of trimmer line is extended from each hole. Keypad LED display Green LED flashing X X Troubleshooting Possible faults Low battery power. Possible action Charge the battery. Battery Condition The battery warning LED flashes. Possible faults Temperature deviation, the battery is too cold or too hot to use. The battery is empty. Possible procedure Let the battery cool down or move it indoors to warm it up. When the battery has the correct temperature, it can be used again. Use the battery in ambient temperatures between -10 °C (14 °F) and 40 °C (104 °F). Charge the battery. 1752 - 001 - 03.11.2021 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
3.
Continue to turn the the top half of the trimmer head
until the triangles (C) align.
C
4.
Remove and discard the remaining trimmer line, if
there is.
5.
Cut approximately 5.5 m/18 ft of new trimmer line.
6.
Put one end of the trimmer line into one of the holes.
7.
Push the trimmer line through the trimmer head and
through the opposite hole.
X
X
8.
Pull the trimmer line through the trimmer head until
there is an equal length of trimmer line on each side.
9.
Hold the trimmer head lower half stable with one
hand.
10. Use your opposite hand to turn the top half
counterclockwise.
11. Continue to turn the knob until approximately 127
mm/5 in of trimmer line is extended from each hole.
Troubleshooting
Keypad
LED display
Possible faults
Possible action
Green LED flashing
Low battery power.
Charge the battery.
Battery
Condition
Possible faults
Possible procedure
The battery warning LED
flashes.
Temperature deviation, the
battery is too cold or too hot
to use.
Let the battery cool down or move it indoors to warm
it up. When the battery has the correct temperature,
it can be used again. Use the battery in ambient tem-
peratures between -10 °C (14 °F) and 40 °C (104
°F).
The battery is empty.
Charge the battery.
1752 - 001 - 03.11.2021
17