IBM 39M5657 User Guide - Page 51
Repositioning, Reattaching, Leader
View all IBM 39M5657 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Repositioning or Reattaching a Leader Pin Attention Use a repaired tape cartridge only to recover data and move it to another cartridge. Continued use of a repaired cartridge may void the warranties of the drive and the cartridge. If the leader pin in your cartridge becomes dislodged from its pin-retaining spring clips or detaches from the tape, you must use the IBM Leader Pin Reattachment Kit (part number 08L9129) to reposition or reattach it. (Do not reattach the pin if you must remove more than seven meters (23 feet) of leader tape.) The sections that follow describe each procedure. Repositioning a Leader Pin A leader pin that is improperly seated inside a cartridge can interfere with the operation of the drive. Figure 11 shows a leader pin in the incorrect 1 and correct 2 positions. To place the leader pin in its proper position, you will need the following tools: v Plastic or blunt-end tweezers v Cartridge manual rewind tool (from Leader Pin Reattachment Kit, part number 08L9129) Figure 11. Leader pin in the incorrect and correct positions. The cartridge door is open and the leader pin is visible inside the cartridge. To reposition the leader pin, perform the following steps. 1. Slide open the cartridge door and locate the leader pin ( 2 in Figure 12 on page 36. You may need to shake the cartridge gently to roll the pin toward the door). Using Ultrium Media 35