IBM 88632SU User Manual - Page 53
simultaneously.
View all IBM 88632SU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
5. Touch the static-protective package that contains the DIMM to any unpainted metal surface on the outside of the server; then, remove the DIMM from the package. 6. Turn the DIMM so that the DIMM keys align correctly with the slot. DIMM Retaining clip 7. Insert the DIMM into the connector by aligning the edges of the DIMM with the slots at the ends of the DIMM connector. Firmly press the DIMM straight down into the connector by applying pressure on both ends of the DIMM simultaneously. The retaining clips snap into the locked position when the DIMM is seated in the connector. If there is a gap between the DIMM and the retaining clips, the DIMM has not been correctly inserted; open the retaining clips, remove the DIMM, and then reinsert it. 8. Repeat steps 4 through 7 to install any remaining DIMMs on the memory card. Chapter 2. Installing options 41