IBM HS20 User Guide - Page 28
Switches, Jumpers - blade servers
UPC - 087944983033
View all IBM HS20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Switches Table 1 describes the function of each switch on the switch block (SW2). Table 1. Switch block (SW2) Switch number Default value Switch description 1 through 7 Off Reserved. 8 Off Power-on password override. Changing the position of this switch bypasses the power-on password check the next time the blade server is turned on and starts the Configuration/Setup Utility program so that you can change or delete the power-on password. You do not have to move the switch back to the default position after the password is overridden. See "Using passwords" on page 46 for additional information about the power-on password. Jumpers When the BIOS code page jumper (J12) is moved from pins 1 and 2 to pins 2 and 3, you can start the blade server from a backup BIOS page. The default position is pins 1 and 2. See the blade server Hardware Maintenance Manual and Troubleshooting Guide on the IBM BladeCenter Documentation CD or the IBM BladeCenter T Documentation CD for complete details. Note: If you start the blade server from the backup page because the primary BIOS page has become damaged, you must flash the primary BIOS code. 14 BladeCenter HS20 Type 8832: Installation and User's Guide